Commercial Bathroom Fixtures (AODA) Toronto, Scarborough, Mississauga, GTA | MED+

SOAP DISPENSER- 206

MED + — Thu, 11 Jan 2018 05:06:46 +0000

“HORIZONTAL” Mount Soap Dispenser is fabricated of heavy gauge stainless steel #4 finish. Soap Valve has chrome plated brass housing with ABS plastic and stainless steel mechanism. Body is heliarc welded to back plate. Back plate has concealed mounting

The post SOAP DISPENSER- 206 appeared first on MedPlus.

DISPOSAL UNIT- 520

MED + — Thu, 11 Jan 2018 05:05:29 +0000

Towel dispenser and waste receptacle door to be fabricated of # 304, 20 gauge stainless steel that is attached to a 22 gauge satin coat cabinet by means of full length stainless steel piano hinge. Door is to be fabricated with a keyed cylinder lock. “keyed alike”. Removable waste container is fabricated out of 22 […]

The post DISPOSAL UNIT- 520 appeared first on MedPlus.

TAMPON DISPENSER- 700

MED + — Thu, 11 Jan 2018 05:04:01 +0000

One piece cabinet is fabricated of 20 gauge #304 stainless steel with ½” returns to wall surface for maximum strength. Door is permanently attached to cabinet body by means of heavy duty, full length stainless steel piano hinge. Door is equipped with 2 pin tumbler. Vendor is equipped with 2 turn knob mechanisms available in […]

The post TAMPON DISPENSER- 700 appeared first on MedPlus.

COMPLETE STAINLESS STEEL- 910040 and 910060

MED + — Thu, 11 Jan 2018 05:01:32 +0000

Swing-Up Grab Bar is fabricated of 1 ¼”, 18 gauge stainless steel type # 304 with a polished finish. Bar to be spring loaded to lock in an upright and in an extended position. Toilet roll holder (when required) shall be fabricated of 18 gauge stainless steel. Wall plate is to be fabricated of 3/16” […]

The post COMPLETE STAINLESS STEEL- 910040 and 910060 appeared first on MedPlus.

DISPOSAL UNIT- 500

MED + — Wed, 10 Jan 2018 14:42:54 +0000

Towel Dispenser and waste receptacle door are fabricated of 20 gauge #304 stainless steel attached to 22 gauge satin coat cabinet by means of full length stainless steel piano hinge. Door is fabricated with 2 keyed cylinder locks. (keyed alike) Removable waste container is fabricated of # 22 gauge satin coat steel. Unit designed to […]

The post DISPOSAL UNIT- 500 appeared first on MedPlus.

GRAB BAR – CONCEALED- 910C

MED + — Wed, 10 Jan 2018 14:32:18 +0000

Grab Bar is fabricated of 18 gauge (050) stainless steel tube 3” (76mm). The 12 gauge concealed flanges are heliaric welded to tubing and predrilled and tapped to accommodate 3 set screws. The mounting plate is fabricated of 18 gauge stainless steel.

The post GRAB BAR – CONCEALED- 910C appeared first on MedPlus.

FRAME MIRROR- 110

MED + — Wed, 10 Jan 2018 14:29:34 +0000

Tilt mirror is fabricated of #304 stainless steel material. Frame is heliaric welded and ground smooth to a #4 satin finish. Mirror tilts 4’’forward from wall with no adjustment.

The post FRAME MIRROR- 110 appeared first on MedPlus.

GRAB BAR – SNAP FLANGE- 910D

MED + — Wed, 10 Jan 2018 14:29:30 +0000

Grab Bar is fabricated of 18 gauge(.050) stainless steel tube 3” (76mm). The 12 gauge Snap flanges to be heliaric welded to tubing and shall include #12 x 2”philps pan head stainless steel screws. Mounting plate is to be fabricated of 18 gauge stainless steel. Snap cover plate to be fabricated of 22 gauge material.

The post GRAB BAR – SNAP FLANGE- 910D appeared first on MedPlus.

TOILET ROLL HOLDER- 443

MED + — Wed, 10 Jan 2018 14:29:10 +0000

Dual roll toilet tissue dispenser is fabricated of 18 gauge, #304 stainless steel. The door is fastened to the cabinet by a heavy duty full length piano hinge. The dispenser holds two rolls of standard roll type toilet paper. While one roll is being dispensed, an extra roll remains above until bottom roll is depleted, […]

The post TOILET ROLL HOLDER- 443 appeared first on MedPlus.

SOAP DISPENSER- 205

MED + — Wed, 10 Jan 2018 14:27:18 +0000

“VERTICAL” Mount Soap Dispenser is fabricated of heavy gauge stainless steel #4 finish. Soap Valve has chrome plated brass housing with ABS plastic and stainless steel mechanism. Body is heliarc welded to back plate. Back plate has concealed mounting

The post SOAP DISPENSER- 205 appeared first on MedPlus.